Protection that works when it has to
Modern RCD and RCBO protection means an earth fault trips one circuit in milliseconds instead of putting a person at risk or taking out the whole property.
Derby · NAPIT Full Scope electrical contractor
Electrical InstallationsAnd Rewires In Derby,Certified And Guaranteed
Full rewires, consumer unit upgrades, additional circuits, garden and outbuilding power. We install to current regulations as a NAPIT Full Scope contractor, then test, certify and guarantee qualifying work for six years.
NAPIT registered, Full Scope · £10m public liability · 6-year NAPIT-backed workmanship guarantee on qualifying installations
-
16+ years
Domestic, commercial and industrial experience
-
Full Scope
NAPIT registered for all aspects of electrical work
-
6-year
NAPIT-backed workmanship guarantee on qualifying installs
-
£10m
Public and employers' liability cover
-
Free
Initial consultation, no obligation
The service
The installation everything else in the building depends on
Core electrical contracting work: complete and partial rewires, consumer unit replacement, additional circuits for kitchens, extensions and outbuildings, garden and driveway power, and new build first and second fix. We hold NAPIT Full Scope registration, covering all aspects of electrical work.
A rewire sets what the building can do for the next thirty years. Circuit counts, cable routes, socket positions, consumer unit capacity and spare ways decide what can be added later without opening the walls back up. That now includes automation, EV charging, solar and heat pumps, none of which existed in most homes when the current wiring was designed.
Automation is our other specialism, so we design installations with that future in mind as standard. Circuits split usefully. A consumer unit with genuine spare capacity. Data run alongside mains where it costs almost nothing to add now. Cable routes documented properly rather than left to memory.
Who this is for
- Properties with rubber, fabric or aluminium wiring, or a fuse board with rewireable fuses
- Renovations and extensions where circuits must be extended, replaced or reconfigured
- Landlords needing installations brought up to standard and certified for letting
- Buyers whose survey or EICR has flagged the electrical installation
- New builds and self-builds needing first and second fix by a Full Scope contractor
What it costs to leave it
An old installation tends to fail on the day it matters most
Deteriorating wiring gives quiet warnings before loud ones: a breaker that trips occasionally, a warm socket, lights that dim when the shower runs, a faint smell near a fitting. Each is easy to work around and each indicates a circuit under stress. Old rubber and fabric insulation goes brittle and cracks away from the conductor, exposing live copper inside walls and ceiling voids where nothing is visible.
Older boards make the consequences worse. Installations without RCD protection remove the layer that stops an electric shock becoming fatal, and a rewireable fuse board offers none of the discrimination that keeps a fault on one circuit from taking out the whole property. These are safety issues, plain and simple.
There's a financial side too. A failed EICR can hold up a sale or a tenancy. Insurers ask about installation condition after a fire. Piecemeal patching, a new circuit here, a spur there, spends money over and over on an installation that still needs replacing eventually. A planned rewire alongside decoration is a lot cheaper than the same work forced through afterwards.
Mistakes we get called out to fix
- Adding heavy loads such as EV chargers or hot tubs to an installation with no spare capacity
- Replacing a consumer unit without correcting the circuit faults it now detects
- Spurring off circuits repeatedly instead of installing a properly designed new circuit
- Decorating a house fully, then discovering the rewire has to happen afterwards
- DIY or uncertified work that surfaces at survey, EICR or sale and has to be redone
- Choosing a board with no spare ways, ruling out solar, EV or automation without another change
How the job runs
A fixed sequence, so nothing
gets decided on the fly
-
01
Free consultation and assessment
We inspect the existing installation, talk through how the property's used and what's planned for it, and set out plainly what needs replacing and what doesn't.
-
02
Design and quotation
Circuit schedule, board and capacity plan, socket and switch positions agreed room by room, cable routes and a written quotation with a clear scope before work starts.
-
03
First fix
Cabling, back boxes, containment and board position installed before plaster, with routes recorded and future capacity built in for automation, EV and solar.
-
04
Second fix
Accessories, fittings and the consumer unit installed and connected, keeping the property as workable as possible if you're living in it during the works.
-
05
Test, certify and guarantee
Full inspection and testing, an Electrical Installation Certificate issued, notification handled through NAPIT, and a 6-year workmanship guarantee on qualifying work.
What you actually get
Measurable outcomes, not adjectives
Capacity for what comes next
Boards specified with genuine spare ways and accessible cable routes mean EV charging, solar, a heat pump or automation can be added without another disruptive change.
Sockets where people actually stand
Positions agreed room by room against how you use the space, ending the extension leads that permanently occupy the corners of most kitchens and offices.
Certified and notified correctly
An Electrical Installation Certificate and NAPIT notification give you the paperwork that surveys, letting agents, insurers and buyers all ask for.
One team, one standard
The same people design, first fix, second fix and test the installation, so responsibility never gets passed between trades.
Six-year workmanship guarantee
Qualifying installation work is covered by a 6-year NAPIT-backed guarantee, with a minimum one year on other work and £10m public liability behind it.
In detail
Rewires, boards, circuits and outbuilding supplies
Electrical work covers a wide range of jobs with one thing in common: it's either designed and certified correctly or it isn't. Here's the detail of what we install across homes and commercial premises in Derby and Derbyshire.
Full and partial rewires
A full rewire replaces every circuit in the property; a partial rewire replaces the circuits that need it while leaving sound ones in place. We recommend whichever is genuinely justified after inspection.
- Complete replacement of rubber, fabric and aluminium wiring
- Circuit design based on room use and realistic future load
- Chasing, floor lifting and making good agreed and planned before starting
- Staged rewires for occupied homes so the property stays liveable
- Data, speaker and control cabling installed at the same time where wanted
- As-installed circuit schedule and cable routes documented at handover
Consumer units and protection
The board is the safety centre of the installation. Replacing it can expose faults that were sitting there undetected, so we test the circuits before we ever recommend a straight swap.
- Metal-clad consumer units with RCBO protection per circuit
- Surge protection where sensitive electronics or automation are installed
- Spare ways specified deliberately for EV, solar, battery and control circuits
- Circuit identification, labelling and schedules that match reality
- Main bonding, earthing arrangements and supply checks verified and corrected
Additional circuits and outbuildings
Most enquiries aren't full rewires, they're a specific new requirement. These are designed as proper circuits in their own right.
- Kitchen, utility, shower and cooker circuits sized to the appliance load
- Garden power, external sockets and armoured supplies to sheds and garages
- Garden rooms, workshops and studios with their own board and protection
- Hot tub, pond, gate and irrigation supplies with correct protection and rating
Domestic, commercial and new build
Full Scope registration means we aren't limited to one installation type, and the same standards of design, testing and documentation apply across all of them.
- New build first and second fix worked to the construction programme
- Commercial distribution boards, three-phase supplies and sub-mains
- Office, retail and hospitality fit-outs including small power and lighting
- Industrial containment, control panel supplies and machinery connections
Before you enquire
Installations & rewires questions,
answered straight
How much does a rewire cost in Derby?
Property size, construction, access, the number of circuits and how much making good is involved all change the figure substantially, so we don't publish prices. The initial assessment is free and you get a written quotation with a defined scope.
How long does a full rewire take?
For a typical house, first and second fix together usually run over one to two weeks depending on size and access, plus testing and certification. We give you a programme in writing before starting.
Can I stay in the house during a rewire?
Usually, yes. We stage the work room by room and keep power and lighting available to the areas you're using, agreeing the sequence with you before we start.
Do I need a full rewire or just a new consumer unit?
Testing tells us. A board upgrade on sound circuits is a good investment; a board upgrade on deteriorated wiring simply detects the faults it was always going to. We test first and recommend accordingly.
Will you make good after chasing and lifting floors?
Making good is agreed in the quotation so there are no surprises. We set out exactly what's included and what your decorator or builder picks up.
What certification do I receive?
An Electrical Installation Certificate for the work carried out, with notification handled through our NAPIT registration, the documentation surveys, insurers and letting agents ask for.
How long should an electrical installation last?
A rewire done correctly is expected to serve for decades, with periodic inspection recommended around every ten years for owner-occupied homes and every five for rented property.
Do you handle emergencies or urgent faults?
It's available on request. We don't sell it as a standard guaranteed service, but call us and we'll tell you plainly what we can do and when.
What guarantee and insurance do you carry?
Qualifying installation work carries a 6-year NAPIT-backed workmanship guarantee, with a minimum one year on other work. We hold £10m public liability, £10m employers' liability and £1m professional indemnity, and issue RAMS on request.
Which areas do you cover?
Derby and across Derbyshire, Nottinghamshire, Staffordshire and South Yorkshire, including Duffield, Belper, Ripley, Matlock, Ashbourne, Ilkeston, Long Eaton, Burton upon Trent, Nottingham, Chesterfield and Sheffield.
Related services
Where we work
Derby · Nottingham · Duffield · Belper · Burton upon Trent · Sheffield · Ilkeston · Long Eaton and the wider East Midlands. See areas covered, read more about the company or return to the homepage.
Get the installation
assessed before you decorate
Book a free assessment and we'll tell you what genuinely needs replacing, what doesn't, and how to sequence it around the rest of your project.
NAPIT Full Scope · Official Loxone Partner · 6-year workmanship guarantee on qualifying installations · £10m public liability