R Electrical Solutions Ltd logo
Large contemporary red-brick house with gabled roofs and full-height glazing, wired for smart home automation

Derby, Derbyshire · DE22 base

Smart Home AutomationAnd Electrical ContractingIn Derby

Based in Derby, working in Derby. From Darley Abbey to Pride Park, we design and install systems built to keep working for years, not just to pass on handover day.

Book Your Free Consultation07970 285567

Free first visit to your Derby property, no obligation.

  • 16+ years

    Domestic, commercial and industrial experience

  • Full Scope

    NAPIT registered for all aspects of electrical work

  • 6-year

    NAPIT-backed workmanship guarantee on qualifying installs

  • £10m

    Public and employers' liability cover

  • Free

    Initial consultation, no obligation

Working in Derby

A Derby contractor with a Derby address

We run R Electrical Solutions from a DE22 base on the north-west edge of the city, so Derby jobs are the shortest journey of our week. Surveys happen fast. A snagging visit doesn't need a half-day booked around it, and a commissioning tweak after handover is a quick, short drive.

Ross Hutchinson has 16+ years across domestic, commercial and industrial work, including control panel commissioning on food-handling production lines. You see the crossover in Derby sometimes. A Strutt's Park villa gets a rewire and a Loxone install together. A small unit off Ascot Drive wants lighting and HVAC on one controller.

Derby's housing splits into distinct pockets. Allestree, Littleover, Mickleover and Oakwood are mostly post-war semis and detached homes with straightforward cable runs and decent loft access. Darley Abbey, Strutt's Park and the Duffield Road area hold older stone and brick houses, many in conservation areas. Surface trunking is out of the question there, so we plan routes before any wall gets chased.

The city centre and Cathedral Quarter mix flats over shops with converted mills and offices. An automation or CCTV job there often needs a landlord, tenant and building manager all signed off at once. Pride Park and the industrial estates cover the commercial side. Three-phase supplies, panel work, emergency lighting, lease-renewal EICRs and old BMS installs that need someone to make sense of them again.

We see the same jobs come round in Derby. EV chargers going onto consumer units last touched in the 1990s. Garden power on the bigger plots north of the city. Whole-home Loxone systems fitted during an extension, with the wiring going in before the plaster does.

Period and conservation-area homes

Stone and brick around Darley Abbey, Strutt's Park and Duffield Road. Solid walls and protected finishes rule out lazy routing, so we plan the route before first fix.

Suburban family housing

Allestree, Mickleover, Littleover and Oakwood properties mid-extension or reconfiguration. Good candidates for a staged automation build.

City-centre flats and conversions

Converted mills and offices where communal supplies and limited riser space set the limits. We work with what the building allows.

Commercial and industrial units

Pride Park offices and units south and east of the city. Lighting, HVAC, access control and panel work under one system, with RAMS issued first.

Getting to Derby

DE1, DE3, DE21, DE22, DE23 and DE24 are all local runs from our base, so we can usually fit a survey visit or a post-handover adjustment in without much fuss. Duffield, Belper, Ilkeston, Long Eaton and Ripley are minutes away too.

What we get asked for here

  • Whole-home Loxone systems installed during extensions
  • Full and partial rewires on older housing stock
  • EICRs for landlords, lease renewals and sales
  • EV charge points with consumer unit upgrades
  • Hikvision and Ajax CCTV integrated with automation
  • Commercial BMS commissioning across Loxone, Trend, KNX and Schneider

Services in Derby

Everything we install for Derby clients

Every service below is available across Derby, and it's all covered under NAPIT Full Scope. Follow a link for detail on design, install and certification.

Why Derby clients call us

Why choose us in Derby

We are based here

DE22 means Derby is our shortest trip, so surveys and aftercare are easy to fit in.

16+ years across three sectors

Domestic, commercial and industrial work in one pair of hands. A house gets wired to the same standard as a production line.

NAPIT Full Scope registration

Registered for all aspects of electrical work. Certification gets issued correctly, and we handle Building Regs notifications for you.

Official Loxone Partner

Loxone-trained and listed, and we also work with Lutron, Rako, KNX, ClickSmart, HD Anywhere and Sonos in house. That means the system we fit actually matches the property.

6-year workmanship guarantee

There's a NAPIT-backed 6-year guarantee on qualifying installations. Everything else carries a minimum 1 year, and maintenance packages are available beyond that.

£10m liability cover

£10m public liability, £10m employers' liability, £1m professional indemnity. That covers any commercial site that asks first.

Local conditions

What we keep finding in Derby properties

Problems tend to repeat by area. Knowing Derby's set before the survey means we can quote for the job that's actually there.

Rewires put off a decade too long

Much of Derby's housing predates 1970 and is still running on cabling extended and spurred by successive owners. Rubber and early PVC insulation goes brittle. Borrowed neutrals turn up on lighting circuits, and often the first sign is an RCD tripping for no clear reason. An EICR tells you where you actually stand.

Solid walls, conservation limits

Darley Abbey, Strutt's Park and the Duffield Road corridor were built solid, often in stone, with no cavity to hide anything in. Retrofitting cabling there is a design job before it's anything else. Rush it and you end up with surface trunking somewhere nobody wanted it.

Supplies that can't take the new load

EV chargers, heat pumps and hot tubs are going onto supplies sized for a very different household decades ago. We do a load calculation, and add load management where needed, so the charger works every night instead of tripping the house.

Orphaned commercial control systems

Plenty of Derby offices run BMS installs commissioned years back by a contractor long gone, with no documentation and nobody left who understands the strategy. Heating fights cooling. Lighting runs all night. The bills absorb it quietly. We take those systems on and write them up properly this time.

How the job runs

The same five steps on every Derby job

  1. 01

    Free initial consultation

    We come to the property, walk it room by room, and listen to how you actually live or trade in the building before anyone talks about kit.

  2. 02

    Design

    Once you decide to progress, we produce the design — schematics, cable routes and control strategy — so nothing is invented on site later.

  3. 03

    First fix

    Containment, cabling and back boxes go in while the building is open, on a staged payment tied to that milestone.

  4. 04

    Second fix and commissioning

    Accessories, panels and controllers are fitted, then programmed, tested and certified to BS 7671 before anyone signs anything off.

  5. 05

    Handover and aftercare

    You get a walkthrough, the certification pack and the choice of a remote or in-person maintenance package to keep the system right.

Before you enquire

Derby questions, answered straight

Do you serve Derby?

Yes, it's our home city. We work from DE22 across DE1, DE3, DE21, DE22, DE23, DE24 and the surrounding villages.

How fast can you reach my Derby property?

It's our shortest journey, so surveys are usually the easiest to schedule, and we'll give you a firm time up front.

What does an electrician cost in Derby?

We don't publish prices. Projects vary too much for a price list to mean anything. The first consultation is free and you get a written quote before committing to anything.

Do you offer emergency call-outs in Derby?

On request, particularly for commercial and automation clients. We don't sell it as a guaranteed standard service, so just ask and we'll tell you straight where we stand.

Are you qualified to certify work in Derby?

Yes. We hold NAPIT Full Scope, covering all aspects of electrical work, and we handle certification and Building Regs notification where needed.

Can Loxone go into an older Derby house?

Regularly. We design the cabling strategy before anything is chased, and sometimes a mix of wired and wireless works best.

Do you work on commercial premises in Derby?

Yes, offices, retail and industrial across Pride Park and beyond. Lighting, HVAC and access control under one BMS, and RAMS issued on every job.

Do I have to automate the whole house at once?

No. Plenty of clients start with heating or one room of lighting, and we put cabling in place so it's easy to expand later without reopening walls.

Do you cover areas outside Derby?

Yes, Nottingham, Duffield, Belper, Burton upon Trent, Sheffield, Ilkeston, Long Eaton, Ripley, Chesterfield, Ashbourne and Matlock.

What guarantee do I get on work in Derby?

A NAPIT-backed 6-year guarantee on qualifying installations, a minimum of 1 year on everything else, and maintenance packages if you want them after.

Nearby areas we cover

Keep reading

Browse the full services list, read more about the company, return to the homepage or get in touch about a project in Derby, Derbyshire.

Exterior building signage illuminated with colour-changing LED lighting installed by R Electrical Solutions

Planning a project in Derby?

Tell us what you're trying to achieve at your Derby property. We'll walk it with you free of charge, before anyone mentions equipment or cost.

Request Your Free Consultation07970 285567

NAPIT Full Scope · Official Loxone Partner · 6-year workmanship guarantee on qualifying installations · £10m public liability

Call NowGet an Estimate