R Electrical Solutions Ltd logo
Large contemporary red-brick house with gabled roofs and full-height glazing, wired for smart home automation

Burton upon Trent, Staffordshire

Smart Home AutomationAnd Electrical ContractingIn Burton Upon Trent

A brewing town with heavy industry sat right alongside its housing. We use our control panel background here as much as we use it on any house.

£10m liability cover as standard on Burton site visits, RAMS on request.

  • 16+ years

    Domestic, commercial and industrial experience

  • Full Scope

    NAPIT registered for all aspects of electrical work

  • 6-year

    NAPIT-backed workmanship guarantee on qualifying installs

  • £10m

    Public and employers' liability cover

  • Free

    Initial consultation, no obligation

Working in Burton upon Trent

Houses in town, control panels on the industrial estates

Burton sits a straight run south-west from Derby on the A38. Industrial work is as likely as a house call here, more so than anywhere else we cover. The brewing trade left production buildings, warehouses and light industrial units dotted among Victorian terraces, inter-war semis and new estates at Stretton, Branston and Winshill.

Ross spent years building and commissioning food-handling control systems on production lines and panels worldwide. That's useful in a town built on process plant. Reading a panel schedule or fixing a control fault doesn't change much whether the product is beer or something else entirely.

Burton's housing spans a lot of ground. Terraces near the centre are late Victorian, solid-walled, often with cellars, and usually carry decades of patched-up wiring. Horninglow, Winshill and Stapenhill add inter-war and post-war stock. Stretton and Branston bring newer estate homes, where the ask is normally EV charging, security or heating control.

The industrial side is what sets Burton apart from most of our patch. Warehousing and food and drink production sites need three-phase supplies, panels, emergency lighting and building management systems that behave. We produce RAMS for any job and hold £10m liability cover, and most sites want to see that before they'll let you through the gate.

River proximity matters too. Parts of Burton sit near the Trent with a known flood history. That changes where we mount equipment and how we separate ground-floor and cellar circuits. We make that call up front, not halfway through the job.

Victorian terraces and cellars

Solid-wall houses near the centre with cellars, tight stair positions and years of piecemeal rewiring behind the plaster.

Inter-war and post-war suburbs

Horninglow, Winshill and Stapenhill housing usually due a consumer unit upgrade or full rewire before anything else goes in.

Modern estate housing

Stretton and Branston, where jobs tend to be EV charging, garden power and getting the network to reach the whole house.

Industrial and production units

Brewing, food, drink and distribution premises needing panels, three-phase work, emergency lighting and BMS commissioning.

Getting to Burton upon Trent

Burton is a quick A38 run from our Derby base, and one we use regularly. Surveys, staged installs and return commissioning visits are easy to fit in for both houses and sites.

What we get asked for here

  • Control panel work and production-line electrical support
  • BMS design and commissioning on Loxone, Trend, KNX and Schneider
  • Periodic inspection, EICRs and emergency lighting testing
  • Rewires and consumer unit upgrades in older terraces
  • EV charge points at homes and workplaces with load management
  • CCTV and access control for industrial and warehouse premises

Services in Burton upon Trent

Everything we install for Burton upon Trent clients

We cover the full domestic, commercial and industrial range in Burton upon Trent, under NAPIT Full Scope registration, with RAMS available for site work.

Why Burton upon Trent clients call us

Why choose us in Burton upon Trent

Real industrial experience

Food-handling control systems, panels and production-line commissioning on sites worldwide. In a process town that helps us diagnose a fault instead of guessing at it.

One contractor, three sectors

We do domestic, commercial and industrial work under one roof. A factory owner's house and their production line can both go through people who know both.

Site documentation ready

£10m public liability, £10m employers' liability, £1m professional indemnity, and RAMS on any project. That's the paperwork Burton's bigger sites tend to ask for.

NAPIT Full Scope registration

Registered across all aspects of electrical work. Certification gets issued correctly, and Building Regulations notification is handled where it applies.

Official Loxone Partner

Partner-listed for Loxone, with Trend, KNX and Schneider also in scope, so we pick the control system to suit the job.

6-year workmanship guarantee

NAPIT-backed 6-year guarantee on qualifying installations, minimum 1 year elsewhere, with maintenance packages after.

Local conditions

Burton conditions we design around

A river town with heavy industry and plenty of pre-war housing brings its own risks. Here's what shapes our designs.

Flood risk and low-level equipment

Parts of Burton sit close to the Trent with a known flood history. Fitting consumer units or controllers low down in a cellar or ground-floor utility room asks for trouble. Where the risk is real we raise equipment and separate ground-floor circuits so a wet week doesn't end in a rewire.

Industrial environments that punish standard kit

Production areas bring washdown, steam, dust, vibration and heat swings. Standard accessories fail fast there. We choose IP rating, glands and cable to suit the environment.

Undocumented control systems

Plenty of Burton sites run control installed years ago by contractors long gone. No documentation, nobody left who understands it. Plant fights itself, energy gets wasted, and faults take days to trace. We document what's there before we touch anything.

Terraces wired for a different era

Town-centre Victorian and inter-war housing has often been extended spur by spur. Mixed cable, no circuit separation, no board schedule. An EICR turns that into a plan with real priorities.

How the job runs

The same five steps on every Burton upon Trent job

  1. 01

    Free initial consultation

    We come to the property, walk it room by room, and listen to how you actually live or trade in the building before anyone talks about kit.

  2. 02

    Design

    Once you decide to progress, we produce the design — schematics, cable routes and control strategy — so nothing is invented on site later.

  3. 03

    First fix

    Containment, cabling and back boxes go in while the building is open, on a staged payment tied to that milestone.

  4. 04

    Second fix and commissioning

    Accessories, panels and controllers are fitted, then programmed, tested and certified to BS 7671 before anyone signs anything off.

  5. 05

    Handover and aftercare

    You get a walkthrough, the certification pack and the choice of a remote or in-person maintenance package to keep the system right.

Before you enquire

Burton upon Trent questions, answered straight

Do you serve Burton upon Trent?

Yes. Burton is a direct A38 run from Derby and a regular area for us, covering the town plus Stretton, Branston, Winshill and Stapenhill.

How fast can you reach Burton?

It's one of the quicker journeys we make out of Derbyshire, so consultations and site visits are easy to book at a firm time.

What does the work cost in Burton?

We quote per project rather than publish prices, since a terrace rewire and a panel build have nothing in common. First consultation is free, and the written quote comes before anything starts.

Do you offer emergency call-outs in Burton?

Available on request, most often used by commercial and industrial clients. Call and we'll tell you what's realistic.

Can you work on production and process equipment?

Yes. Panel construction and production-line commissioning, including food-handling systems, is core to our background.

Do you provide RAMS for Burton sites?

Yes, for any project on request, alongside £10m public liability, £10m employers' liability and £1m professional indemnity.

Can you take on a BMS installed by someone else?

Yes. Inherited Loxone, Trend, KNX and Schneider systems are regular work for us. We document the existing setup, fix what conflicts, and leave you something you can maintain.

Do you install EV chargers for Burton businesses?

Yes, workplace and fleet charging as well as domestic, with supply assessment and load management first.

Which nearby areas do you cover?

Derby, Ashbourne, Long Eaton, Ilkeston and the wider East Midlands, with Burton on our western edge.

What guarantee applies to Burton work?

A NAPIT-backed 6-year workmanship guarantee on qualifying installations and a minimum 1-year guarantee on other work, with maintenance packages available.

Nearby areas we cover

Keep reading

Browse the full services list, read more about the company, return to the homepage or get in touch about a project in Burton upon Trent, Staffordshire.

Exterior building signage illuminated with colour-changing LED lighting installed by R Electrical Solutions

Planning a project in Burton upon Trent?

House, office or production floor. Book a free consultation and we'll take a look before recommending anything.

NAPIT Full Scope · Official Loxone Partner · 6-year workmanship guarantee on qualifying installations · £10m public liability

Call NowGet an Estimate